nofilmschool.com/types-of-film-lights

 

“Not every light performs the same way. Lights and lighting are tricky to handle. You have to plan for every circumstance. But the good news is, lighting can be adjusted. Let’s look at different factors that affect lighting in every scene you shoot. ”

Use CRI, Luminous Efficacy and color temperature controls to match your needs.

 

Color Temperature
Color temperature describes the “color” of white light by a light source radiated by a perfect black body at a given temperature measured in degrees Kelvin

 

https://www.pixelsham.com/2019/10/18/color-temperature/

 

CRI
“The Color Rendering Index is a measurement of how faithfully a light source reveals the colors of whatever it illuminates, it describes the ability of a light source to reveal the color of an object, as compared to the color a natural light source would provide. The highest possible CRI is 100. A CRI of 100 generally refers to a perfect black body, like a tungsten light source or the sun. ”

 

https://www.studiobinder.com/blog/what-is-color-rendering-index/

 

 

 

https://en.wikipedia.org/wiki/Color_rendering_index

 

Light source	CCT (K)	CRI
Low-pressure sodium (LPS/SOX)	1800	−44
Clear mercury-vapor	6410	17
High-pressure sodium (HPS/SON)	2100	24
Coated mercury-vapor	3600	49
Halophosphate warm-white fluorescent	2940	51
Halophosphate cool-white fluorescent	4230	64
Tri-phosphor warm-white fluorescent	2940	73
Halophosphate cool-daylight fluorescent	6430	76
“White” SON	2700	82
Standard LED Lamp	2700–5000	83
Quartz metal halide	4200	85
Tri-phosphor cool-white fluorescent	4080	89
High-CRI LED lamp (blue LED)	2700–5000	95
Ceramic discharge metal-halide lamp	5400	96
Ultra-high-CRI LED lamp (violet LED)	2700–5000	99
Incandescent/halogen bulb	3200	100

 

Luminous Efficacy
Luminous efficacy is a measure of how well a light source produces visible light, watts out versus watts in, measured in lumens per watt. In other words it is a measurement that indicates the ability of a light source to emit visible light using a given amount of power. It is a ratio of the visible energy to the power that goes into the bulb.

 

FILM LIGHT TYPES

https://www.studiobinder.com/blog/video-lighting-kits/?utm_campaign=Weekly_Newsletter&utm_medium=email&utm_source=sendgrid&utm_term=production-lighting&utm_content=production-lighting

 

 

 

Consumer light types

 

https://www.researchgate.net/figure/Emission-spectra-of-different-light-sources-a-incandescent-tungsten-light-bulb-b_fig1_312320039

 

http://dev.informationdisplay.org/IDArchive/2015/NovemberDecember/FrontlineTechnologyCandleLikeEmission.aspx

 

 

Tungsten Lights
Light interiors and match domestic places or office locations. Daylight.

Advantages of Tungsten Lights
Almost perfect color rendition
Low cost
Does not use mercury like CFLs (fluorescent) or mercury vapor lights
Better color temperature than standard tungsten
Longer life than a conventional incandescent
Instant on to full brightness, no warm-up time, and it is dimmable

Disadvantages of Tungsten Lights
Extremely hot
High power requirement
The lamp is sensitive to oils and cannot be touched
The bulb is capable of blowing and sending hot glass shards outward. A screen or layer of glass on the outside of the lamp can protect users.

 

 

Hydrargyrum medium-arc iodide lights
HMI’s are used when high output is required. They are also used to recreate sun shining through windows or to fake additional sun while shooting exteriors. HMIs can light huge areas at once.

Advantages of HMI lights
High light output
Higher efficiency
High color temperature

Disadvantages of HMI lights:
High cost
High power requirement
Dims only to about 50%
the color temperature increases with dimming
HMI bulbs will explode is dropped and release toxic chemicals

 

 

Fluorescent
Fluorescent film lighting is achieved by laying multiple tubes next to each other, combining as many as you want for the desired brightness. The good news is you can choose your bulbs to either be warm or cool depending on the scenario you’re shooting. You want to get these bulbs close to the subject because they’re not great at opening up spaces. Fluorescent lighting is used to light interiors and is more compact and cooler than tungsten or HMI lighting.

Advantages of Fluorescent lights
High efficiency
Low power requirement
Low cost
Long lamp life
Cool
Capable of soft even lighting over a large area
Lightweight

Disadvantages of Fluorescent lights
Flicker
High CRI
Domestic tubes have low CRI & poor color rendition.

 

 

LED
LED’s are more and more common on film sets. You can use batteries to power them. That makes them portable and sleek – no messy cabled needed. You can rig your own panels of LED lights to fit any space necessary as well. LED’s can also power Fresnel style lamp heads such as the Arri L-series.

Advantages of LED light
Soft, even lighting
Pure light without UV-artifacts
High efficiency
Low power consumption, can be battery powered
Excellent dimming by means of pulse width modulation control
Long lifespan
Environmentally friendly
Insensitive to shock
No risk of explosion

Disadvantages of LED light
High cost.
LED’s are currently still expensive for their total light output

(more…)