www.studiobinder.com/blog/what-is-loop-lighting-photography
a blog of links related to computer animation and production technology Sponsored by ReelMatters.com
Category: lighting
-
-
-
Key/Fill ratios and scene composition using false colors
To measure the contrast ratio you will need a light meter. The process starts with you measuring the main source of light, or the key light.
Get a reading from the brightest area on the face of your subject. Then, measure the area lit by the secondary light, or fill light. To make sense of what you have just measured you have to understand that the information you have just gathered is in F-stops, a measure of light. With each additional F-stop, for example going one stop from f/1.4 to f/2.0, you create a doubling of light. The reverse is also true; moving one stop from f/8.0 to f/5.6 results in a halving of the light.
Let’s say you grabbed a measurement from your key light of f/8.0. Then, when you measured your fill light area, you get a reading of f/4.0. This will lead you to a contrast ratio of 4:1 because there are two stops between f/4.0 and f/8.0 and each stop doubles the amount of light. In other words, two stops x twice the light per stop = four times as much light at f/8.0 than at f/4.0.
theslantedlens.com/2017/lighting-ratios-photo-video/
Examples in the post
-
Is a MacBeth Colour Rendition Chart the Safest Way to Calibrate a Camera?
www.colour-science.org/posts/the-colorchecker-considered-mostly-harmless/
“Unless you have all the relevant spectral measurements, a colour rendition chart should not be used to perform colour-correction of camera imagery but only for white balancing and relative exposure adjustments.”
“Using a colour rendition chart for colour-correction might dramatically increase error if the scene light source spectrum is different from the illuminant used to compute the colour rendition chart’s reference values.”
“other factors make using a colour rendition chart unsuitable for camera calibration:
– Uncontrolled geometry of the colour rendition chart with the incident illumination and the camera.
– Unknown sample reflectances and ageing as the colour of the samples vary with time.
– Low samples count.
– Camera noise and flare.
– Etc…“Those issues are well understood in the VFX industry, and when receiving plates, we almost exclusively use colour rendition charts to white balance and perform relative exposure adjustments, i.e. plate neutralisation.”
-
RawTherapee – a free, open source, cross-platform raw image and HDRi processing program
5.10 of this tool includes excellent tools to clean up cr2 and cr3 used on set to support HDRI processing.
Converting raw to AcesCG 32 bit tiffs with metadata.
Categories
- 3Dprinting (166)
- A.I. (553)
- animation (336)
- blender (183)
- colour (224)
- commercials (45)
- composition (147)
- cool (357)
- design (617)
- Featured (54)
- hardware (291)
- IOS (107)
- jokes (134)
- lighting (272)
- modeling (104)
- music (183)
- photogrammetry (160)
- photography (740)
- production (1,224)
- python (81)
- quotes (480)
- reference (302)
- software (1,285)
- trailers (287)
- ves (510)
- VR (218)
Recent Posts
- Midjourney – Film types and tokens for photorealism
- NVidia Jetson Orin Nano Super Developer Kit – The most affordable generative AI supercomputer
- Pencil2D – a free, easy, intuitive tool to make 2D hand-drawn animations
- Natron – a free, cross-platform, open source Compositing Software For VFX and Motion Graphics
- Shotcut.org – a free, open source, cross-platform video editor